EW838 J & P BALCON® system

Category

This is an assessment of the J & P BALCON® (cast-in welded steel connection assembly) steel balcony fixing system, which is designed for each individual installation with liaison, input and authorisation of use required from the manufacturer’s engineers.

This registration applies to the J & P BALCON® steel balcony to concrete fixing system, for use on reinforced concrete floors or precast concrete/hollow-deck floors - connections are designed in consultation with J&P Building Systems technical/structural engineering department

Within the BALCON® range there is a standard product which has been configured to design parameters derived from the JORDAHL® anchor channel system, and J&P Building Systems Ltd are authorised and regulated by JORDAHL® in the use and application of these cast-in channel systems. Design resistances for the J & P BALCON® system have been derived in accordance with the JORDAHL® European Technical Approval ETA-09/0338 (June 2018).

 

Valid until 26th November 2022

 

Please Note: Every care was taken to ensure the information was correct at the time of publication. Any written guidance provided does not replace the user’s professional judgement. It is the responsibility of the dutyholder or person carrying out the work to ensure compliance with relevant Building Regulations or applicable technical standards.

Documents

J&P Building Systems Ltd
Thame Forty
Jane Morbey Road
Thame
Oxfordshire
OX9 3RR
01844 215200