Garage conversion: Tips from our building control experts

Blog Post
Integral garage conversion in progress

A garage conversion doesn't always need planning permission as it often falls under 'permitted development'. But it's important to check permitted development rights still apply before starting any work, even if just for your client's sake.

Converting a garage will always need a building regulations application. A Building Notice application where detailed plans aren't needed will usually do, although a Full Plans application with a fully detailed specification will give you and your customer more security about what work needs to be carried out before you commence on site.

7 key considerations for a good garage conversion job

You must ensure the foundations are strong enough to carry any additional masonry loads. A new inner skin on the external wall or filling in the garage door with brick & block and a window will all add extra weight. Check the condition and suitability of the existing foundation or floor when the door infill area is excavated. If there isn't a foundation below the existing garage door you could carry the new wall off a suitable lintel - talk to your building control surveyor.

1. Walls

Check the existing walls for stability and make sure there aren't any defects. If satisfactory, then your building control surveyor is likely to consider it suitable for structural purposes. If it's single skin with piers and the piers are being removed, the wall will be weakened and should be tied to a new inner leaf using remedial wall ties.

2. Weather

If you're dealing with a wall of single leaf construction, you must treat it to make it weatherproof. Treatment options include tanking the wall using a vapour permeable membrane linked to a damp proof course or membrane at floor level or providing a lightweight blockwork inner leaf with insulation in the new cavity. In all wall types, care must be taken to ensure the floor membrane laps with the DPC in the existing walls.

3. Insulation

You must insulate the walls, roof, floor and any new windows, rooflights and doors to habitable standards, your designer will help you choose the right insulation, but the level of insulation should provide U-Values equal to or better than:

  • Roof                       0.15 W/m2K
  • External walls        0.18 W/m2K
  • Floor                      0.18 W/m2K
  • Windows               1.4 W/m2K (Band B) [1.6 W/m2K (Band C) for timber frame windows until 14 June 2023]
  • Doors                    1.4 W/m2K (Band B) [1.8 W/m2K (Band E) for timber fire doors and, until 14 June 2023, other external timber doors]
  • Rooflights              2.2 W/m2K

Remember that you may need to add or increase ventilation to roof voids. When lining the garage with an independent stud partition, the insulation should be fitted tightly between the studs - using insulated plasterboard is best to avoid cold bridging. The maximum area of glazing/openings should not exceed 25% of the floor area of the space being converted. Other options for design flexibility might be available and you should discuss these with your designer. These fabric values might change again after 2025.
 

4. Ventilation

Windows must have openable vents of an area equal to either 1/10th of the floor area of the room (for windows having a fully open angle of between 15degrees to 30degrees), or 1/20th of the floor area (for all other window openings/angles of more than 30degrees). If the conversion is for a new habitable room or kitchen to either a bungalow, or a house with multiple floors, the room must also have either 10,000mm2 or 8,000mm2 of trickle (background) ventilation, respectively – which might be a vent contained in the window frame. If the conversion is for a new wet-room (a kitchen/bath/shower/toilet/utility room) then there should be background ventilation of at least 5,000mm2 and an extractor fan should be provided to extract air at a rate of:

  • 30l/s          Kitchen with cooker hood extracting directly to outside
  • 60l/s          Kitchen without a cooker hood or with only a recirculation hood    
  • 30l/s          Utility room
  • 15l/s          Bath and/or Shower-room
  • 6l/s            Toilet

If the conversion is to create a lounge, dining/TV/play room or sleeping space or similar and the room can only be accessed through another room, a window with a clear opening of 450 x 733mm at no more than 1.1m above floor level is a must for means of escape (it’s also a good idea to install a domestic smoke alarm to cover the area outside the converted room, and installed either in any connecting circulation space or access room). It is also strongly recommended that any new windows or doors be designed to be secure against possible break-in.

5. Sound

Any party wall between the garage and an adjoining property will need to be insulated to stop sound transmission. Check the existing wall construction - anything less than 200mm of dense blockwork will usually need further work, which may include additional masonry or specialist independent acoustic partitions – your building control surveyor will be able to advise you further.

6. Electricity

The requirements of Part P - Electrical safety in dwellings will apply to the new conversion, so ensure any installations are compliant and certified to BS 7671.

Your building control surveyor should be able to provide practical guidance on site.

Find your local LABC team with our free postcode search tool

Did you find this article useful?

Further details on garage conversions can be found on the LABC Front Door website.

Then read our advice and watch videos on:

Image courtesy of woodspropertysolutions.co.uk

 

Please Note: Every care was taken to ensure the information was correct at the time of publication. Any written guidance provided does not replace the user’s professional judgement. It is the responsibility of the dutyholder or person carrying out the work to ensure compliance with relevant building regulations or applicable technical standards.


This article was updated on 18 July 2022

Comments

Garage converstion

Submitted 5 years 3 months ago

Do i need to change my bedroom windows to open 45 degrees if i have a garage conversion that leads to a stair well?

Garage conversion

Submitted 5 years 3 months ago

Hello, thank you for the enquiry. Generally speaking, either an openable window to the outside is needed or access to a protected staircase enclosure. Details of the size of the window are shown in approved document B volume 1 2.8. I would suggest that you contact the local team to discuss the layout of your particular project. Contact details can be obtained by finding your local building control department on our website at: https://www.labc.co.uk/your-local-council-building-control-department - simply enter your postcode and click 'Search'.

Garage

Submitted 5 years 2 months ago

I have a garage under my living inside my house with a bedroom downstairs I would like to know the rules on the insolation As my gas bills are over £200 by boy is always cold in he’s room and my living is too it’s a good I have had o e wall done but still so cold we can’t even use the toilet downstairs can anyone help ???

In reply to by Zoe dunn (not verified)

Reply to: Garage

Submitted 5 years 2 months ago

Hi, thanks for the enquiry.

If you would like to convert your existing garage into living accommodation you will need building regulation approval. Your local building control team will be pleased to provide pre-application advice about your specific project. Find your local team here: https://www.labc.co.uk/your-local-council-building-control-department — simply enter your postcode and click 'Search'.

We also have a video about garage conversions here: https://labc.co.uk/homeowners/do-i-need-building-regulations-application-specific-projects/garage-conversion

All the best,

John, LABC

Garage conversion

Submitted 5 years 3 months ago

Mine used to be a carport on the ground floor. Was thinking of taking off the garage door and putting brick wall with window and new front door.electric is already there as I'm an electrician. Would I need any permission to do this? Thanks

Do I need foundations

Submitted 5 years 3 months ago

Hi
I am converting my double door garage into kitchen ,and the garage already have a room constructed above it. the only changes I am doing is replacing doors into windows and already have a pier ( column ) which is supporting the beam above it , all three walls have foundation and the pier has a foundation as well only under the doors there there isn’t any foundation but there is 300 deep solids concrete floor , do I need any foundations to replace the doors windows.
Thanks

Do I need foundations

Submitted 5 years 2 months ago

Hi, thanks for the message.

It is unlikely that new foundations will be required below the window. However, you will need to think about the relationship of the existing damp proof course/damp proof membrane within the slab and the new window. A Building Regulation application will be required for this work and it would be a good idea to obtain pre-application advice from the LABC team.

John, LABC

Detached Garage Building Control

Submitted 5 years 2 months ago

Hello, I am converting my detached garage into a home office. Do I need to submit a Building Control Notice or is my conversion exempt?
Many thanks :-)

Reply to: Detached Garage Building Control

Submitted 5 years 2 months ago

Hello, thanks for the enquiry.

If the detached garage is an exempt structure it is likely that the conversion will also be exempt from building regulations approval. New electrical connections may still need to be undertaken by a competent person and achieve a Part P certificate.

For detailed advice on your particular project you can contact your local building control team. Find them here: https://www.labc.co.uk/your-local-council-building-control-department — simply enter your postcode and click 'Search'.

Regards,

John, LABC

Integral garage conversion

Submitted 5 years 1 month ago

Hi I would like to convert one end of an integral garage to a utility room. There is a window and door already in the back wall and the walls are cavity with a bedroom above. The floor is concrete with a step up into the house and the outside door just a little above ground level. The ceiling needs lowering by 250mm, (there is already a plasterboard ceiling in place). A stud wall needs to be installed to partition off the new utility.
My question is what thickness should the partition be, what insulation should I use (there is just a regular garage door at the other end) and should the plasterboard be fire proof and plastered (on both sides of the wall).
Many thanks
Geoff

Add new comment

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

Sign up to the building bulletin newsletter

Over 48,000 construction professionals have already signed up for the LABC Building Bulletin.

Join them and receive useful tips, practical technical information and industry news by email once every 6 weeks.

Subscribe to the Building Bulletin