Garage conversion: Tips from our building control experts

A garage conversion doesn't always need planning permission as it often falls under 'permitted development'. But it's important to check permitted development rights still apply before starting any work, even if just for your client's sake.

Converting a garage will always need a building regulations application. A building notice application where detailed plans aren't needed will usually do, although an application for building control approval with a fully detailed specification will give you and your customer more security about what work needs to be carried out before you commence on site.

7 key considerations for a good garage conversion job

You must ensure the foundations are strong enough to carry any additional masonry loads. A new inner skin on the external wall or filling in the garage door with brick & block and a window will all add extra weight. Check the condition and suitability of the existing foundation or floor when the door infill area is excavated. If there isn't a foundation below the existing garage door you could carry the new wall off a suitable lintel - talk to your Registered Building Inspector to agree on the most suitable method to provide adequate support to the any new brickwork and blockwork.

1. Walls

Check the existing walls for stability and make sure there aren't any defects. If satisfactory, then your Registered Building Inspector is likely to consider it suitable for structural purposes. If it's single skin with piers and the piers are being removed, the wall will be weakened and should be tied to a new inner leaf using remedial wall ties.

2. Weather

If you're dealing with a wall of single leaf construction, you must treat it to make it weatherproof. Treatment options include tanking the wall using a vapour permeable membrane linked to a damp proof course or membrane at floor level or providing a lightweight blockwork inner leaf with insulation in the new cavity. In all wall types, care must be taken to ensure the floor membrane laps with the DPC in the existing walls.

3. Insulation

You must insulate the walls, roof, floor and any new windows, rooflights and doors to habitable standards, your designer will help you choose the right insulation, but the level of insulation should provide U-Values equal to or better than:

• Roof                       0.15 W/m2K
• External walls        0.18 W/m2K
• Floor                      0.18 W/m2K
• Windows               1.4 W/m2K (Band B) 
• Doors                    1.4 W/m2K (Band B) 
• Rooflights              2.2 W/m2K

Remember that you may need to add or increase ventilation to roof voids. When lining the garage with an independent stud partition, the insulation should be fitted tightly between the studs - using insulated plasterboard is best to avoid cold bridging. The maximum area of glazing/openings should not exceed 25% of the floor area of the space being converted. Other options for design flexibility might be available and you should discuss these with your designer.
 

4. Ventilation

Windows must have openable vents of an area equal to either 1/10th of the floor area of the room (for windows having a fully open angle of between 15degrees to 30degrees), or 1/20th of the floor area (for all other window openings/angles of more than 30degrees). If the conversion is for a new habitable room or kitchen to either a bungalow, or a house with multiple floors, the room must also have either 10,000mm2 or 8,000mm2 of trickle (background) ventilation, respectively – which might be a vent contained in the window frame. If the conversion is for a new wet-room/bathroom then there should be background ventilation of at least 4,000mm2 and an extractor fan should be provided to extract air at a rate of:

• 30l/s          Kitchen with cooker hood extracting directly to outside
• 60l/s          Kitchen without a cooker hood or with only a recirculation hood    
• 30l/s          Utility room
• 15l/s          Bath and/or Shower-room
• 6l/s            Toilet

If the conversion is to create a lounge, dining/TV/play room or sleeping space or similar and the room can only be accessed through another room, a window with a clear opening of 450 x 733mm at no more than 1.1m above floor level is a must for means of escape (it’s also a good idea to install a domestic smoke alarm to cover the area outside the converted room, and installed either in any connecting circulation space or access room). It is also strongly recommended that any new windows or doors be designed to be secure against possible break-in.

5. Sound

Any party wall between the garage and an adjoining property will need to be insulated to stop sound transmission. Check the existing wall construction - anything less than 200mm of dense blockwork will usually need further work, which may include additional masonry or specialist independent acoustic partitions – your Registered Building Inspector will be able to advise you further.

6. Electricity

The requirements of Part P - Electrical safety in dwellings will apply to the new conversion, so ensure any installations are compliant and certified to BS 7671.

Image courtesy of woodspropertysolutions.co.uk

Disclaimer:  

Every care has been taken to ensure that the above content is correct at the time of publication.  Any reliance on the content should be verified by the dutyholder(s) and their professional advisers.  It is the responsibility of the dutyholder(s) and/or person carrying out the work to ensure compliance with the relevant building regulations and associated legislation.

This content is given in good faith by LABC.  It is not definitive, and compliance will be a matter for the relevant building control authority to decide as the enforcing body for the building regulations, and ultimately for the appropriate tribunal or court to determine.  

LABC – Application and use of Member Guidance Notes   LABC is a membership organisation, providing guidance and support to its member local authorities around England and Wales. LABC is unable to comment on the application and enforcement of the Building Regulations or other building safety related legislation to a particular proposal, as this is a matter for the local authority in whose jurisdiction the building work is being carried out or, in the case of High-Risk Buildings (HRBs), the Building Safety Regulator (BSR) and for the courts to rule upon.