LABC Assured Search

EWW812 i-SIP Building System

This is an assessment of the Innovaré Systems Ltd Structural Insulated Panel System developed for wall and roofing. The assessment is for a typical four storey domestic property and external treatment should be dealt with separately. The structurally insulated panels (SIPs) comprise OSB/3, EPS...

EW985 SQ Board

This is an assessment of a Chloride Free Magnesium Oxide Board which can be used internally or externally for use as sheathing, fire protection, to provide part of the sound resistance in a structure or to be used as a substrate onto which render can be applied. The Board is CE marked. Valid until...

EWWS493B Terrain Pleura System

This is an assessment of the Terrain Pleura System which has been designed for the purpose of relieving positive pressures within a drainage soil or waste stack. Comprising of the P.A.P.A. (Positive Air Pressure Attenuator) and Terrain Pleura AAVs, the Terrain Pleura Systems eliminates the need for...

EWS977 JUWO Poroton ThermoPlan System

This is an assessment of the JUWO Poroton ThermoPlan block system. The blocks are constructed of fired-clay and use a thin-joint mortar system, applied with a specialist mortar roller. The blocks contain a vertical cellular void structure and the non-face ends of the blocks are keyed with a vertical...

EW1029 Firestop 20 Professional GRP System

This is an assessment of Firestop 20 Professional GRP System used for waterproofing of roofs, balconies and walkways. The System consists of Firestop 20 Professional Base Resin and Chopped Strand (CSM) Fibreglass Reinforcement Roll / Taping Mat applied insitu over a good quality OSB3 deck. The roof...

EWS940 TapcoSlate

This is an assessment of Tapco slates that are manufactured from a recyclable blend of limestone and polypropylene and are made to resemble a natural slate pattern. Each slate measures 445mm in height and 295mm in width and has ridge caps that are 152mm by 457mm. Each slate and ridge cap weigh...

EW597J K Rend Acrylic TC15

This is an assessment of K Rend Acrylic TC15 a cement free ready to use synthetic resin plaster that incorporates an Acrylic resin and a biocide. It is suitable for external or internal use on a range of suitably prepared substrates to provide a textured finish (please refer to scope and conditions...

EWW597H K Rend Brick Rend & Mineral TC

This is an assessment of K Rend Brick Rend and K Rend Mineral TC. K Rend Brick Rend is a cement based polymer modified two-coat self-coloured cementitious rendering mortar for external use it is designed to simulate a conventional brickwork effect. K Rend Mineral TC is a cement based polymer...

EW597G K Rend Silicone Roughcast

This is an assessment of K Rend Silicone Roughcast a cement based polymer self-coloured rendering mortar suitable for external use conforming to Annex ZA of BS EN 998 – 1 :2010. It is designed to be used over a range of suitably prepared and primed substrates over an appropriate basecoat and dash...

EWW597F K Rend Dash Receivers

This is an assessment of the K Rend Dash Receiver range: K Rend Standard Dash Receiver, K Rend Silicone Dash Receiver, K Rend Silicone Spray Dash Receiver and K Rend Over-Coating Silicone Dash Receiver cement based polymer modified through coloured receivers for dry dash conforming to Annex ZA of BS...