How to get it right: Too much abutment flashing?

Blog Post
Image of a roof/chimney abutment flashing.

This roof/chimney abutment flashing has been chased into a rendered wall to form a straight edge. It’s acting as a soaker because the lead runs under the roof tile, but water can penetrate when rainwater runs down the wall behind the flashing and through capillary action via the poorly fitted overlaps.

How to get flashing right

A better way of forming the junction would have been to have the roof tiles closer to the abutment, with each soaker around the same length as the slate and fitted over the tile beneath it to prevent the tile fixings from puncturing the soaker beneath it.

A stepped, cover flashing or secret gutter should have then been dressed into the masonry and rolled at a maximum length of 1.5m for a minimum code 4 lead (depending on location) laid over the line of soakers to direct rainwater down the roof into the guttering.

More information on this can be found on the Lead Sheet Association pocket guide.

Also read: How to install gutters.

 

Please Note: Every care was taken to ensure the information was correct at the time of publication. Any written guidance provided does not replace the user’s professional judgement. It is the responsibility of the dutyholder or person carrying out the work to ensure compliance with relevant building regulations or applicable technical standards.

 

Comments

(No subject)

Submitted 5 years 6 months ago

I'm sorry but I would have to disagree with your comments here. Firstly the picture does not look as though there is any chase? Secondly you mention a stepped flashing on masonry but this is render and therefore would only require a straight flashing? Also the LSA states that code 4 is the minimum for FLASHINGS and code 3 the minimum for SOAKERS so your wording is completely wrong..... please address and come back to me.

Kind regards

Sophie

(No subject)

Submitted 5 years 6 months ago

As far as I'm aware, the LDA handbook lists code 3 lead suitable only for soakers in sheltered locations - not for cover flashings......

Reply

Submitted 5 years 6 months ago

Thanks for the comments received.

We have amended the article to correct the typo for the lead code and offer a better description for use nationally.

We have been advised that the wall was chased, a wedge (of sorts) is visible just beneath the render to part of the poorly cut lead.

Thanks,

Julie, LABC

Add new comment

CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.

Sign up to the building bulletin newsletter

Over 48,000 construction professionals have already signed up for the LABC Building Bulletin.

Join them and receive useful tips, practical technical information and industry news by email once every 6 weeks.

Subscribe to the Building Bulletin