LABC Assured Search

EW543A Mike Wye & Associates Ltd - Limecrete Flooring System

This is an assessment of the Limecrete flooring system as supplied by Mike Wye & Associates. Limecrete is a system designed to provide an insulated breathable ground bearing floor slab, intended primarily for traditionally built housing which might not be well suited to the provision of impervious...

EW624 Abbey Pynford Helical Pile System

This is an assessment of a Steel Helical Pile System that can be used as a deep foundation solution instead of other foundation systems. This registration covers the piles only. Other items such as ground beams or Housedeck or Comdeck type slab foundations are to be dealt with separately or have...

EWW628 Cellmas Ltd - CELLUBLOCK

The Cellmas Ltd CELLUBLOCK® is made of waste paper/cardboard diverted from landfills. It’s a lightweight load-bearing block with high thermal and acoustics performances. It has an appearance and properties of a standard concrete block, however some of its behavior is more like that of wood. For use...

EWWS545J Kingspan Kooltherm K118 Insulated Plasterboard

Kingspan Kooltherm K118 Insulated Plasterboard is a premium performance, lower lambda internal wall insulation, with a fibre-free rigid thermoset phenolic core. It has a 12.5mm plasterboard bonded to its front surface and a composite foil based facing on its reverse surface. It is suitable for...

EWWS545G1 Kingspan Kooltherm K12 Framing Board

Kingspan K12 Framing Board is a rigid board insulation that is designed to be used for timber and steel framing systems. The product is manufactured in thicknesses ranging from 25mm-150mm and has a thermal conductivity of 0.020 – 0.023W/mK and is manufactured with a blowing agent that has zero...

EWWS545E Kingspan Kooltherm K108 Cavity Board

Kingspan K108 Cavity Board is a rigid board insulation that is designed to be used in a cavity wall as a partial fill insulation. The product is manufactured in thicknesses ranging from 20mm-160mm and has a thermal conductivity of 0.018W/mK and is manufactured with a blowing agent that has zero...

EWWS545D1 Kingspan Kooltherm K7 Pitched Roof Board

Kingspan K7 Pitched Roof Board is a rigid board insulation that is designed to be used for tiled or slated pitch warm and cold roof spaces. It can be installed in a number of timber roof construction types and can be placed above, between and below rafters and also within vertical stud walls to roof...

EWWS545B2 Kingspan K103 Floorboard

Kingspan K103 Floorboard is a rigid board insulation that is designed to be used for under floor insulation. The product is manufactured in 10mm incremental thicknesses ranging from 25mm up to 150mm and has a thermal conductivity of 0.018W/mK and is manufactured with a blowing agent that has zero...

EW602 Advanced Smoke Group Limited – RTC Smokeclear Real Time Control Pressure Differential System

This is an assessment of the RTC Smokeclear Real Time Control Pressure Differential System manufactured by Advanced Smoke Group Limited, incorporating the use of Door Position Sensors (DPS) for close control of precise closed door design pressures and open door velocities, applicable to all pressure...

EW591 YBS ThermaQuilt

This is an assessment of ThermaQuilt Multi Layer insulation blanket as an insulation material for roofs walls for use in both new build and refurbishment. The insulation is made up of layers of metallic foil and wadding connected by double T plastic clips to avoid thermal bridging. For use in slate...